メインコンテンツにスキップ

Moultrie I45 GameSpy LCD Screen Replacement

必要な工具と部品

  1. Moultrie I45 GameSpy LCD Screen Replacement, Casing: 手順 1、 1の画像 1
    • Using a Philips head screwdriver, remove the eight 6mm screws located at the bottom of the device.

  2. Moultrie I45 GameSpy LCD Screen Replacement: 手順 2、 1の画像 1
    • Remove the butterfly nut from the lid arm.

  3. Moultrie I45 GameSpy LCD Screen Replacement: 手順 3、 1の画像 1
    • Remove the lid-covering.

  4. Moultrie I45 GameSpy LCD Screen Replacement: 手順 4、 1の画像 1
    • Using a Phillips head screwdriver, remove the six 4mm screws from the face of the camera.

  5. Moultrie I45 GameSpy LCD Screen Replacement: 手順 5、 1の画像 1
    • Gently separate the two halves of the case.

    • The two halves are connected by a wire. Pulling too roughly can damage the wires and cause the camera to stop functioning.

  6. Moultrie I45 GameSpy LCD Screen Replacement, LCD Screen: 手順 6、 1の画像 1
    • Using a Philips head screwdriver, remove the 12, 3mm screws from the board.

  7. Moultrie I45 GameSpy LCD Screen Replacement: 手順 7、 1の画像 1
    • Gently remove the circuit board from the face of the camera

  8. Moultrie I45 GameSpy LCD Screen Replacement: 手順 8、 1の画像 1
    • Remove the LCD screen.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

1人の作成者と共同作成されました。

Sean Hill

メンバー登録日: 01/29/15

485 ポイント

4のガイドは作成済み

チーム

UW Tacoma, Team 3-7, Rose Winter 2015 UW Tacoma, Team 3-7, Rose Winter 2015人のメンバー

UWT-ROSE-W15S3G7

3 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 822