はじめに

Once the battery and battery cover have been removed, the case back cover can be separated from the rest of the case, as shown in this guide.

パーツ

パーツは必要ありません。

  1. Slide the cover release button towards the bottom of the phone Once the battery cover pops up, slide the cover towards the top of the phone and lift up.
    • Slide the cover release button towards the bottom of the phone

    • Once the battery cover pops up, slide the cover towards the top of the phone and lift up.

  2. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  3. Push the battery towards the top of the phone and lift up.
    • Push the battery towards the top of the phone and lift up.

  4. With a T5 screwdriver, unscrew the four T5 sized screws that hold the case back cover onto the rest of the case. Remove the plastic case back cover by gently pulling it away from the body of the phone, starting at one edge and working your way down to the other. Remove the plastic case back cover by gently pulling it away from the body of the phone, starting at one edge and working your way down to the other.
    • With a T5 screwdriver, unscrew the four T5 sized screws that hold the case back cover onto the rest of the case.

    • Remove the plastic case back cover by gently pulling it away from the body of the phone, starting at one edge and working your way down to the other.

まとめ

To reassemble your device, follow these instructions in reverse order.

Carson Meena

メンバー登録日: 2012年10月22日

16 ポイント

5のガイドは作成済み

チーム

Clemson, Team 14-2, Benson Fall 2012 Clemson, Team 14-2, Benson Fall 2012人のメンバー

CLEM-BENSON-F12S14G2

4 メンバー

17のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 230