はじめに

Removing the speaker requires the removal of the motherboard, which requires nearly a full dis-assembly of the phone.

パーツ

パーツは必要ありません。

Place thumb on the rubber tab on the lower back of the phone.
  • Place thumb on the rubber tab on the lower back of the phone.

  • Push away from the phone to release back panel.

コメントを追加する

Lift the back panel of the phone to expose battery (not shown here).
  • Lift the back panel of the phone to expose battery (not shown here).

コメントを追加する

Pull antenna up, away from the phone, to reveal two of six screws.
  • Pull antenna up, away from the phone, to reveal two of six screws.

コメントを追加する

Unscrew all six 5.4 mm screws on the back side of the phone using the T-6 screwdriver bit.
  • Unscrew all six 5.4 mm screws on the back side of the phone using the T-6 screwdriver bit.

コメントを追加する

Gently separate the front and back sides of the phone. Be careful not to break or bend the ribbon cables.
  • Gently separate the front and back sides of the phone.

  • Be careful not to break or bend the ribbon cables.

コメントを追加する

Detach the first ribbon cable by unplugging it from the logic board. Detach the first ribbon cable by unplugging it from the logic board.
  • Detach the first ribbon cable by unplugging it from the logic board.

コメントを追加する

Gently remove the side button by pulling the buttons away from the phone. Gently remove the side button by pulling the buttons away from the phone. Gently remove the side button by pulling the buttons away from the phone.
  • Gently remove the side button by pulling the buttons away from the phone.

コメントを追加する

Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone. Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone. Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone.
  • Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone.

コメントを追加する

Slightly bend the phone frame to expose microphone protrusion. Gently remove microphone using your fingers. Gently remove microphone using your fingers.
  • Slightly bend the phone frame to expose microphone protrusion.

  • Gently remove microphone using your fingers.

コメントを追加する

Once the microphone has been removed, remove the connecting piece
  • Once the microphone has been removed, remove the connecting piece

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Haley S

メンバー登録日: 2013年03月11日

1 ポイント

4のガイドは作成済み

チーム

Clemson, Team 13-6, Benson Spring 2013 Clemson, Team 13-6, Benson Spring 2013人のメンバー

CLEM-BENSON-S13S13G6

3 メンバー

10のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 102