はじめに

The antenna greatly affects the quality of the phone's reception.

Place the phone on a flat surface with the front facing down and the antenna fully extended.
  • Place the phone on a flat surface with the front facing down and the antenna fully extended.

  • Use a spudger to remove the circular rubber cover from the base of the antenna.

  • Remove the 3.2 mm Torx T5 screw located under the rubber cover.

コメントを追加する

Remove the antenna by grasping from the white plastic piece just below the antenna and pulling away from the phone.
  • Remove the antenna by grasping from the white plastic piece just below the antenna and pulling away from the phone.

  • Do not grasp the black antenna piece to pull it out. Doing so may damage it.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Garrison Stevens

メンバー登録日: 2012年10月22日

1 ポイント

6のガイドは作成済み

チーム

Clemson, Team 15-2, Benson Fall 2012 Clemson, Team 15-2, Benson Fall 2012人のメンバー

CLEM-BENSON-F12S15G2

4 メンバー

16のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 317