はじめに

This guide will show you how to remove and replace the speaker for a Motorola V3c.

Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c.
  • Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c.

  • Lift and remove the rear panel away from the V3c.

With the phone closed, press the silver button shown with a fingernail or such. Tilt and lift the battery cover and put aside.

walltoall - 返信

Remove the battery by pushing in the top of the battery and lifting it away from the phone.
  • Remove the battery by pushing in the top of the battery and lifting it away from the phone.

The Motorola V3 battery has a notch in one corner to ensure it can only go in one way. Fit the replacement battery by offering its bottom edge to the device, then tilt and click using thumb pressure.

walltoall - 返信

  • Unscrew the two screws in the back using the T6.

コメントを追加する

  • Use the spudger to pop the bottom and the sides of the back casing

  • Be careful not to pull the back lower cover off too far as it is connected to the phone body by a ribbon

コメントを追加する

  • Peel off the connector between the motherboard and the body of the phone

コメントを追加する

  • Pull out the two black rubber covers using tweezers

  • The second rubber cover is much harder to get out

コメントを追加する

  • Pull out the white plastic cover by unclipping the two plastic pieces shown

コメントを追加する

  • Pull out the speaker

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Joshua Ruehlig

メンバー登録日: 2010年01月14日

503 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 11-4, Forte Winter 2010 Cal Poly, Team 11-4, Forte Winter 2010人のメンバー

CPSU-FORTE-W10S11G4

3 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 5,258