はじめに

This guide will show you how to install the upper casing of the phone. This guide is necessary in order to remove the LCD screen or the call speaker.

Remove the back cover by pressing down the silver button.
  • Remove the back cover by pressing down the silver button.

  • Pull the cover away from the phone.

コメントを追加する

Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover.
  • Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover.

コメントを追加する

  • Use tweezers to pry off all four rubber screw covers from the inside face, pulling them towards you.

  • Our phone is missing the two left screw covers, be careful not to lose yours too!

コメントを追加する

  • Remove the four T5 Torx screws that were underneath the rubber covers.

コメントを追加する

  • Use the plastic opening tool to pry the top cover away from the phone.

  • The side buttons on the phone may fall out when the top cover is separated from the phone. They can easily be put back by placing them in their original spot.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Ian Cottengim

メンバー登録日: 2013年04月18日

82 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 3-46, Amido Spring 2013 Cal Poly, Team 3-46, Amido Spring 2013人のメンバー

CPSU-AMIDO-S13S3G46

4 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 25

今までの合計 2,073