はじめに

Use this repair guide to replace a flip-stop bumper pad in a Motorola RAZR2 v9m.

パーツ

パーツは必要ありません。

Gently press the pointy end of the spudger into the edge of the bumper until it bows and separates from the phone. The bumper is held in place with adhesive.  If you plan on reusing the bumper, then use clean tools to keep the surface sticky. Grab the bowed portion of bumper.  Gently lift and peel the bumper away from the phone.
  • Gently press the pointy end of the spudger into the edge of the bumper until it bows and separates from the phone.

    • The bumper is held in place with adhesive. If you plan on reusing the bumper, then use clean tools to keep the surface sticky.

  • Grab the bowed portion of bumper. Gently lift and peel the bumper away from the phone.

    • Remember that the bumper will be sticky. Place it somewhere clean if you will be reusing it.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

John T Roller

メンバー登録日: 2013年06月04日

746 ポイント

6のガイドは作成済み

チーム

University of Kentucky Louisville, Team 1-2, Chamberlain Spring 2013 University of Kentucky Louisville, Team 1-2, Chamberlain Spring 2013人のメンバー

LOUISVILLE-CHAMBERLAIN-S13S1G2

2 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 4

今までの合計 255