メインコンテンツにスキップ
  1. Remove back cover of the phone by disengaging the clip and lifting up on the cover.
    • Remove back cover of the phone by disengaging the clip and lifting up on the cover.

  2. Remove screws 1 through 4. Remove screws 1 through 4.
    • Remove screws 1 through 4.

  3. Once all four screws are removed, you should be able to take off the back half of the phone.
    • Once all four screws are removed, you should be able to take off the back half of the phone.

  4. Remove the connection at the top right of the circuit board.
    • Remove the connection at the top right of the circuit board.

  5. Insert new logic board and reattach top right cable.
    • Insert new logic board and reattach top right cable.

  6. Snap the front and back of the phone back together and reinsert screws 1 through 4.
    • Snap the front and back of the phone back together and reinsert screws 1 through 4.

まとめ

To reassemble your device, follow these instructions in reverse order.

Danielle Matthews

メンバー登録日: 2014年10月17日

13 ポイント

3のガイドは作成済み

チーム

UMass Dartmouth, Team 6-7, Vijaybhaskar Fall 2014 UMass Dartmouth, Team 6-7, Vijaybhaskar Fall 2014人のメンバー

UMASSD-VIJAYBHASKAR-F14S6G7

3 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 103