はじめに

Use this guide to eject or replace your Motorola Moto X SIM card.

パーツ

パーツは必要ありません。

  1. Insert the SIM card eject tool into the hole in the side of the SIM card tray and push to eject the tray.
    • Insert the SIM card eject tool into the hole in the side of the SIM card tray and push to eject the tray.

    • Remove the SIM card tray.

    • If the SIM card does not fall free from the tray on its own, simply remove it with your fingers.

まとめ

To reassemble your device, follow these instructions in reverse order.

9 の人々がこのガイドを完成させました。

Sam Lionheart

メンバー登録日: 2012年10月18日

350,879 ポイント

535のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

108 メンバー

7,544のガイドは作成済み

For my Moto X that I designed from Motorola's website, I had to slightly angle my SIM eject tool to aid in pulling the tray out as it did not eject easily.

Casey Deem - 返信

Who can fix my screàn on uscellular moto x2nd generation

Mike Fuller - 返信

Screàn needs replaced. Come on and màke s sounds...but no picture

Mike Fuller - 返信

統計データを表示:

過去 24時間: 1

過去 7 日: 6

過去 30 日: 29

今までの合計 10,954