メインコンテンツにスキップ

Motorola Moto X 2nd Generation Logo Replacement

必要な工具と部品

  1. Motorola Moto X 2nd Generation Logo Replacement, Logo: 手順 1、 3の画像 1 Motorola Moto X 2nd Generation Logo Replacement, Logo: 手順 1、 3の画像 2 Motorola Moto X 2nd Generation Logo Replacement, Logo: 手順 1、 3の画像 3
    • Remove SIM card tray.

  2. Motorola Moto X 2nd Generation Logo Replacement: 手順 2、 2の画像 1 Motorola Moto X 2nd Generation Logo Replacement: 手順 2、 2の画像 2
    • Use the eject pin to open a gap and place a guitar pick into the gap.

  3. Motorola Moto X 2nd Generation Logo Replacement: 手順 3、 2の画像 1 Motorola Moto X 2nd Generation Logo Replacement: 手順 3、 2の画像 2
    • Slide the guitar pick to cut the adhesive sticker and peel off the soft back cover.

  4. Motorola Moto X 2nd Generation Logo Replacement: 手順 4、 3の画像 1 Motorola Moto X 2nd Generation Logo Replacement: 手順 4、 3の画像 2 Motorola Moto X 2nd Generation Logo Replacement: 手順 4、 3の画像 3
    • Twist off three screws, pry up the securing bracket and remove the logo finally.

終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Sophia

メンバー登録日: 03/25/14

43,810 ポイント

62のガイドは作成済み

2 件のコメント

So apparently, this phone was supposed to have a fingerprint scanner. To anyone who has done this repair, I'm sure you're as confused as me as to why there is a flex cable leading to the "M" logo with nothing attached. My though is that's where the scanner was going to go, and it just never happened, which also explains why the iconic Motorola M dimple is a separate part, compared to the old Moto X and the Gs and Es, which was part of the back plastic cover.

Jeff Caauwe - 返信

Where can you get the replacement part? I'm finding it difficult.

Niall Murray - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 2,479