Motorola Moto E6 Speaker Replacement

はじめに

The speaker in the Motorola Moto E6 can be replaced by following this guide. The speaker should be replaced if it is visually damaged or if it fails to produce sound. The speaker should also be replaced if the user notices a lack of volume or pitch of the sound coming from the speaker.

Before you begin, download the Rescue and Smart Assistant app to backup your device and diagnose whether your problem is software or hardware related.

必要な工具と部品

手順1 Back Cover

Motorola Moto E6 Speaker Replacement, Back Cover: 手順 1、 2の画像 1

Motorola Moto E6 Speaker Replacement, Back Cover: 手順 1、 2の画像 2

Begin by prying open the bottom right of the device using the plastic opening tool.
Work your way around the edge of the device, slowly prying open the casing until it pops off.

編集

手順2 Battery

Motorola Moto E6 Speaker Replacement, Battery: 手順 2、 1の画像 1

Use the opening tool on the divot located below the battery to pop it out.

編集

手順3 Speaker

Motorola Moto E6 Speaker Replacement, Speaker: 手順 3、 1の画像 1

Remove the eleven 3.8 mm T4 Torx screws located above the battery compartment.

編集

手順4

Use the plastic opening tools to pry open the piece located at the top of the device.
Start by prying open the side of the compartment and work your way towards the camera module, prying open the compartment as you go.
Pop off the piece above the battery compartment.

編集

手順5

Motorola Moto E6 Speaker Replacement: 手順 5、 3の画像 3

この手順で使用する道具：

Tweezers

$4.99

購入する

Using tweezers, lift the speaker from the motherboard located at the top of the device.
When replacing with a new component, make sure the clips are facing towards the user.