メインコンテンツにスキップ

はじめに

This panel should be removed to get to all of the watch's insides. It is extremely fragile, so use caution when removing it.

パーツ

パーツは指定されていません。

  1. Set the watch face down on a flat surface.
    • Set the watch face down on a flat surface.

    • Place the heated iOpener on the face of the rear cover to loosen the adhesive underneath.

  2. Android 修理キット

    A new screen or battery is one kit away.

    ショップを見る

    Android 修理キット

    A new screen or battery is one kit away.

    ショップを見る
  3. Gently slide the blue opening pick between the rear cover and the metal casing. The rear cover is extremely fragile. Be very delicate when using the opening pick.
    • Gently slide the blue opening pick between the rear cover and the metal casing.

    • The rear cover is extremely fragile. Be very delicate when using the opening pick.

    • Work your way entirely around the rear cover.

    • It may take several attempts of reheating the adhesive to get the rear cover loose enough to pull off.

  4. Once the adhesive has been successfully loosened, gently pull the rear cover off.
    • Once the adhesive has been successfully loosened, gently pull the rear cover off.

まとめ

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

Cole Twitchell

メンバー登録日: 2015年01月30日

1,484 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 17-32, Amido Winter 2015 Cal Poly, Team 17-32, Amido Winter 2015人のメンバー

CPSU-AMIDO-W15S17G32

4 メンバー

18のガイドは作成済み

How does this *rear cover replacement* count as "no parts required"?

Kyle Mitchell - 返信

There are replacement back covers available here. They are plastic and Non-OEM but better than a broken back cover: http://www.mpfproducts.com/back-cover-re...

Mike - 返信

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 10

過去 30 日: 47

今までの合計 11,276