Motorola Moto 360 3rd Gen Lower Case Replacement - iFixit 修理ガイド

はじめに

Use this guide to replace the lower case on your Motorola Moto 360 3rd Gen smartwatch.

必要な工具と部品

手順1 Lower Case

Motorola Moto 360 3rd Gen Lower Case Replacement, Lower Case: 手順 1、 2の画像 1

Motorola Moto 360 3rd Gen Lower Case Replacement, Lower Case: 手順 1、 2の画像 2

Use a T4 Torx screwdriver to remove the four 4.2 mm screws securing the lower case.
Gently pry the case open with a halberd spudger if the case will not release after removing the bolts.
Do not remove the lower case completely yet; this could damage cables connected to the lower case.

手順2

Motorola Moto 360 3rd Gen Lower Case Replacement: 手順 2、 1の画像 1

Raise the cover without straining the connected ribbon cable.
Disconnect the ribbon cable from the motherboard with a halberd spudger.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

Connor Bassolino

メンバー登録日: 03/29/22

6,658 ポイント

28のガイドは作成済み

+21 個以上のバッジ

チーム

iFixit iFixit人のメンバー

Staff

136 メンバー

17,430のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 58