メインコンテンツにスキップ
  1. Unplug and power off the speaker. Lay the device on its back and unpeel the silicone base. Unscrew the four 5mm Torx Security #10 at base.
    • Unplug and power off the speaker.

    • Lay the device on its back and unpeel the silicone base.

    • Unscrew the four 5mm Torx Security #10 at base.

  2. Return the device rightside up and unpeel the black display cover over the sensor board. Unscrew the two 3mm Torx Security #6 screws on the edge of the device. Unscrew the two 5mm Torx Security #10 in the middle of the device.
    • Return the device rightside up and unpeel the black display cover over the sensor board.

    • Unscrew the two 3mm Torx Security #6 screws on the edge of the device.

    • Unscrew the two 5mm Torx Security #10 in the middle of the device.

    • Do not worry, the display board will re-stick when reassembling.

  3. Remove the metal screen. Remove the metal screen.
    • Remove the metal screen.

  4. Unscrew the two 4mm Torx Security #10 screws on the top edge.
    • Unscrew the two 4mm Torx Security #10 screws on the top edge.

    • Unscrew the six 10mm Torx Security #10 screws around the perimeter.

  5. Remove the four 10mm Torx Security #10 screws around each individual speakers. Loosen the two Torx Security #10 screws under the speaker using pliers or a long screwdriver.
    • Remove the four 10mm Torx Security #10 screws around each individual speakers.

    • Loosen the two Torx Security #10 screws under the speaker using pliers or a long screwdriver.

    • Screws are hidden and are difficult to get to. Also, these screws remain in place due to the magnetic speakers inside.

  6. Lift the speaker assembly and remove the stuffing. When returning the speaker assembly, make sure the stuffing is tucked in. When returning the speaker assembly, make sure the stuffing is tucked in.
    • Lift the speaker assembly and remove the stuffing.

    • When returning the speaker assembly, make sure the stuffing is tucked in.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Sarah Garcia

メンバー登録日: 2016年09月12日

207 ポイント

1ガイドが承認済み

チーム

CSU Fullerton, Team 2-6, Bruce Fall 2016 CSU Fullerton, Team 2-6, Bruce Fall 2016人のメンバー

CSUF-BRUCE-F16S2G6

4 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 55