メインコンテンツにスキップ

Monster DNA Speaker Replacement

必要な工具と部品

  1. Monster DNA Speaker Replacement, Speaker: 手順 1、 2の画像 1 Monster DNA Speaker Replacement, Speaker: 手順 1、 2の画像 2
    • Remove the ear cushions and use a Phillips #2 screwdriver to unscrew the three 5mm screws.

    • Desolder the wires to completely remove the speaker.

    • Take note of the proper location of the wires reassembly.

    • Use a heatgun to loosen the glue holding down the speaker.

    • Be careful to take safety precautions such as gloves as not to cause injury.

  2. Monster DNA Speaker Replacement: 手順 4、 1の画像 1
    • Pry the speaker out using a plastic opening tool or metal spudger.

    • Using too much force will damage the headphones and the new speaker may not go back into place properly.

  3. Monster DNA Speaker Replacement: 手順 5、 1の画像 1
    • Insert new speaker and solder the five wires into corresponding positions onto the new speaker.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Kevin Costello

メンバー登録日: 03/22/17

231 ポイント

2のガイドは作成済み

チーム

UMass Dartmouth, Team S4-G5, Julie Spring 2017 UMass Dartmouth, Team S4-G5, Julie Spring 2017人のメンバー

UMASSD-JULIE-S17S4G5

4 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 5

今までの合計 1,586