Model-V2945Z Cordless Shark Floor and Carpet Sweeper-Rotating Brush Replacement

はじめに

This guide's intent is to provide instructions on how to fix this model of Shark Vacuum, by replacing a broken rotating brush. Its purpose is to educate viewers on how to do this simple repair. The detailed step-by-step instructions include hands-on illustrations throughout the process for this fix. The guide provides the quick, simple steps to locate and remove the brush for replacement. This guide saves viewers money from buying a new Shark Vacuum, by demonstrating how to fix their own.

必要な工具と部品

手順1 Replacing a Rotating Brush

Model-V2945Z Cordless Shark Floor and Carpet Sweeper-Rotating Brush Replacement, Replacing a Rotating Brush: 手順 1、 1の画像 1

Turn vacuum off before starting the fix.
Power-off vacuum by pressing the button on the left-rear side of vacuum until the red light is off.
Lay vacuum down with handle lying flat on the floor.

翻訳

手順2

Remove and empty dust tray; make sure to clean any debris built up.
Lay vacuum up-side-down, locating the broken brush.

翻訳

手順3

Turn the lock counter-clockwise to unlock access to the rotation brush; use a key or flathead screwdriver to fit the lock.
Remove the square brush cover to access the rotation brush.
Once unlocked, the small square brush holder will detach.

翻訳

手順4

Remove the large band from the rotation brush.
Push the band to the side and lift up the right-side of the brush.

翻訳

手順5

Detach left-side of the brush from the vacuum.

翻訳

手順6

Use scissors to cut away any debris entangled in the brush.
The brush is easily damaged by debris if not cleaned regularly; keeping the brush clean lengthens the life of the vacuum.
Clean the area surrounding the brush by scraping with a putty knife before inserting the replacement brush.