はじめに
Follow this guide to remove and replace a faulty electric motor in a Mk Diamond MK660 Wet Saw.
The replacement part is 154292.
必要な工具と部品
-
-
Loosen the plastic knob holding the saw's cutting head in place.
-
Lower the cutting head while keeping it steady.
-
-
-
-
Remove the Phillips #2 screw holding the ground wires to the chassis.
-
Loosen the wires from each other.
-
もう少しです!
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
3 の人々がこのガイドを完成させました。