メインコンテンツにスキップ

Mitsubishi T200 Screen Replacement

必要な工具と部品

  1. Mitsubishi T200 Screen Replacement, Screen: 手順 1、 2の画像 1 Mitsubishi T200 Screen Replacement, Screen: 手順 1、 2の画像 2
    • Begin disassembling the phone by removing the phone back cover and battery.

  2. Mitsubishi T200 Screen Replacement: 手順 2、 1の画像 1
    • To remove the back plate, loosen and remove the four screws by using a #00 Philips head screwdriver.

  3. Mitsubishi T200 Screen Replacement: 手順 3、 1の画像 1
    • Separate the front plastic component from the motherboard component.

  4. Mitsubishi T200 Screen Replacement: 手順 4、 1の画像 1
    • Take the circuit board off the motherboard.

  5. Mitsubishi T200 Screen Replacement: 手順 5、 2の画像 1 Mitsubishi T200 Screen Replacement: 手順 5、 2の画像 2
    • Unclip the four clips to remove the screen (connected to the clear plastic) from the circuit board.

  6. Mitsubishi T200 Screen Replacement: 手順 6、 2の画像 1 Mitsubishi T200 Screen Replacement: 手順 6、 2の画像 2
    • Remove the attached ribbon from the circuit board by prying open the gray plastic clip at the top right of the circuit board.

  7. Mitsubishi T200 Screen Replacement: 手順 7、 2の画像 1 Mitsubishi T200 Screen Replacement: 手順 7、 2の画像 2
    • We can now insert the new screen and reassemble the device.

    • Place the ribbon of the new screen into the clip on the top right of the circuit board.

  8. Mitsubishi T200 Screen Replacement: 手順 8、 1の画像 1
    • Clip the new screen onto the circuit board.

  9. Mitsubishi T200 Screen Replacement: 手順 9、 1の画像 1
    • Replace circut board back on top of motherboard.

  10. Mitsubishi T200 Screen Replacement: 手順 10、 1の画像 1
    • Take the entire internal assembly and join it with the front plastic housing.

    • Ensure that the tops of both pieces clip into place before joining the bottom ones.

  11. Mitsubishi T200 Screen Replacement: 手順 11、 1の画像 1
    • Join the phone's face assembly to the back plastic housing. Make sure you carefully insert the front into the antenna's clip first.

    • Snap the whole unit together.

  12. Mitsubishi T200 Screen Replacement: 手順 12、 1の画像 1
    • Firmly replace screws into the backing.

ゴール

2 の人々がこのガイドを完成させました。

作成者

8人の作成者と共同で作成されました。

Taylor Lewis

メンバー登録日: 02/13/14

14 ポイント

1ガイドが承認済み

チーム

Ohio State, Team 1-5, Meza Spring 2014 Ohio State, Team 1-5, Meza Spring 2014人のメンバー

OSU-MEZA-S14S1G5

4 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 9

今までの合計 801