Minolta QTsi Maxxum View Finder Replacement

手順1 View Finder

Minolta QTsi Maxxum View Finder Replacement, View Finder: 手順 1、 1の画像 1

Locate the battery compartment on the bottom panel of camera.
Use a small coin to untwist and open the batter compartment door.
Twist the coin counterclockwise to unlock the battery compartment door.

編集

手順2

Minolta QTsi Maxxum View Finder Replacement: 手順 2、 1の画像 1

Two batteries are located inside the battery compartment
Be careful, the batteries inside the compartment are small and easy to lose.
Remove the two batteries from inside the battery compartment by individually pulling each out.

編集

手順3

Minolta QTsi Maxxum View Finder Replacement: 手順 3、 1の画像 1

When the batteries are removed from the compartment, one screw will be visible in the bottom of the chamber.
Unscrew the (1) black Phillips #00 5mm screw from the bottom of the battery chamber.
Be careful when unscrewing the screw because it's small and is easy to lose.

編集

手順4

Minolta QTsi Maxxum View Finder Replacement: 手順 4、 1の画像 1

Remove the (2) black Phillips #00 5mm screws that lie on either side of the view finder.
Be careful because the two screws are small and are easy to lose.

編集

手順5

Minolta QTsi Maxxum View Finder Replacement: 手順 5、 1の画像 1

Remove the (1) black Phillips #00 5mm screw from underneath the flash hood.
Be careful because the screw is small and is easy to lose.

編集

手順6

Minolta QTsi Maxxum View Finder Replacement: 手順 6、 2の画像 1

Minolta QTsi Maxxum View Finder Replacement: 手順 6、 2の画像 2

Once all screws are removed, the top of the camera should come off easily.
Be careful when removing the top, there are wires connected that could be damaged.

編集

手順7

Minolta QTsi Maxxum View Finder Replacement: 手順 7、 1の画像 1

The viewfinder will fall when the screws are removed.
Remove the (2) black Phillips #00 5mm screws that hold the viewfinder.
Be careful because the screws are small and easy to lose.