はじめに

The flashbulb and casing are one component located at the top of the camera. A replacement will be the whole component and not each of the parts separately.

パーツ

パーツは必要ありません。

Locate and remove the silver screws on each side of the camera. Use the Phillips #00 Screwdriver to unscrew all 2.0mm (4 instances) and 4.0mm (2 instances) screws. Use the Phillips #00 Screwdriver to unscrew all 2.0mm (4 instances) and 4.0mm (2 instances) screws.
  • Locate and remove the silver screws on each side of the camera.

  • Use the Phillips #00 Screwdriver to unscrew all 2.0mm (4 instances) and 4.0mm (2 instances) screws.

コメントを追加する

Then, carefully pry apart the front and back outer casing away from the internal components. Be aware of the ribbon wire that will disconnect when the casing is detached. Be aware of the ribbon wire that will disconnect when the casing is detached.
  • Then, carefully pry apart the front and back outer casing away from the internal components.

  • Be aware of the ribbon wire that will disconnect when the casing is detached.

コメントを追加する

Remove 2mm screws connecting the flash housing to the main components of the camera. Use a Philips #00 screwdriver to remove the black 2.0mm (4 instances) screws .
  • Remove 2mm screws connecting the flash housing to the main components of the camera.

  • Use a Philips #00 screwdriver to remove the black 2.0mm (4 instances) screws .

コメントを追加する

Use the spudger to push the black plastic hooks through the circuit board to release the flash housing. Once the screws have been removed, pull the circuit board away from the body of the camera. Wires will keep it from completely detaching.
  • Use the spudger to push the black plastic hooks through the circuit board to release the flash housing.

  • Once the screws have been removed, pull the circuit board away from the body of the camera.

  • Wires will keep it from completely detaching.

  • Pull the housing away from the circuit board.

コメントを追加する

まとめ

To reassemble device, follow steps in reverse order. This will require the reattachment of wires from the camera to the flashbulb casing.

Keith Sechrist

メンバー登録日: 2013年03月11日

22 ポイント

2のガイドは作成済み

チーム

Clemson, Team 12-4, Benson Spring 2013 Clemson, Team 12-4, Benson Spring 2013人のメンバー

CLEM-BENSON-S13S12G4

3 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 293