メインコンテンツにスキップ

Minolta Dimage Xt Flash Capacitor Replacement

必要な工具と部品

  1. Minolta Dimage Xt Flash Capacitor Replacement, Casing: 手順 1、 3の画像 1 Minolta Dimage Xt Flash Capacitor Replacement, Casing: 手順 1、 3の画像 2 Minolta Dimage Xt Flash Capacitor Replacement, Casing: 手順 1、 3の画像 3
    • Locate and remove the silver screws on each side of the camera.

    • Use the Phillips #00 Screwdriver to unscrew all 2.0mm (4 instances) and 4.0mm (2 instances) screws.

  2. Minolta Dimage Xt Flash Capacitor Replacement: 手順 2、 3の画像 1 Minolta Dimage Xt Flash Capacitor Replacement: 手順 2、 3の画像 2 Minolta Dimage Xt Flash Capacitor Replacement: 手順 2、 3の画像 3
    • Then, carefully pry apart the front and back outer casing away from the internal components.

    • Be aware of the ribbon wire that will disconnect when the casing is detached.

  3. Minolta Dimage Xt Flash Capacitor Replacement, Flash Capacitor: 手順 3、 2の画像 1 Minolta Dimage Xt Flash Capacitor Replacement, Flash Capacitor: 手順 3、 2の画像 2
    • Caution: Touching the capacitor leads may cause serious injury. Use a capacitor discharge probe to safely rid the capacitors of dangerous charges.

    • On the front side of the camera, locate the flash battery holder.

    • Lift the housing and remove the battery.

    • After removing the battery, clip the wires and solder the replacement battery.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

4人の作成者と共同で作成されました。

Qqq

メンバー登録日: 03/11/13

19 ポイント

1ガイドが承認済み

コメント 1 件

Its a cap not a battery :D

Eigirdas Gedgaudas - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 9

今までの合計 984