Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement

はじめに

Use this guide to replace a damaged gearcase insulator on a Milwaukee Reciprocating Saw 6538-21-B36B (2010).

The gearcase insulator is a component that protects the gear case in power tools. It helps prevent damage to the gear case by providing a layer of insulation and cushioning if damaged use this guide if it needs to be repaired.

手順1 Gearcase Insulator

Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement, Gearcase Insulator: 手順 1、 2の画像 1

Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement, Gearcase Insulator: 手順 1、 2の画像 2

Pull up on the shoe release lever until it's perpendicular to the gearcase insulator.

編集

手順2

Pull the shoe assembly out from the saw.

編集

手順3

Remove the gearcase insulator by folding over the rubber, dislodging the insulator from the red shift lever, and pulling it off.
Using the screwdriver to help lift the rubber over the lever and folding it over may be helpful.

編集