メインコンテンツにスキップ

Milwaukee Hex Impact Driver 2750-20 Output Shaft Bearing Replacement

必要な工具と部品

  1. Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement, Outer Casing: 手順 1、 1の画像 1
    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

  2. Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 手順 2、 1の画像 1
    • Remove the drill casing to expose the drill's interior parts.

  3. Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement, Output Shaft Bearing: 手順 3、 1の画像 1
    • Once the interior is open locate the output shaft driver pictured at the left of the screen.

  4. Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 手順 4、 3の画像 1 Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 手順 4、 3の画像 2 Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 手順 4、 3の画像 3
    • Lift the driver head and motor assembly directly out of the outer casing.

    • Pull the driver head away from the motor assembly, separating the two.

  5. Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 手順 5、 3の画像 1 Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 手順 5、 3の画像 2 Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 手順 5、 3の画像 3
    • Remove the fan and the drive shaft assembly from the motor core assembly.

    • Using a pair of tweezers, remove the retaining ring.

    • Remove the old bearing and reinstall the new retaining clip.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Charles Putnam

メンバー登録日: 02/12/19

409 ポイント

5のガイドは作成済み

チーム

Western Carolina University, Team S1-G1, Virtue Spring 2019 Western Carolina University, Team S1-G1, Virtue Spring 2019人のメンバー

WCU-VIRTUE-S19S1G1

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 12

今までの合計 571