Milwaukee 5262-21 Power Cord Replacement

はじめに

In this guide, we will be replacing a power cord that is not supplying power to your device. You will be replacing a power cord, that is typically common to become faulty on this device. You will be removing 4 bolts.

必要な工具と部品

手順1 Housing Assembly

Milwaukee 5262-21 Power Cord Replacement, Housing Assembly: 手順 1、 1の画像 1

Remove the ten 19mm T20 Torx screws shown in red.

編集

手順2

Remove the red Housing Assembly by lifting it up off of the tool.

編集

手順3 Power Cord

Milwaukee 5262-21 Power Cord Replacement, Power Cord: 手順 3、 2の画像 1

Milwaukee 5262-21 Power Cord Replacement, Power Cord: 手順 3、 2の画像 2

Remove the two 11.5mm T-15 screws shown in red.

編集

手順4

Milwaukee 5262-21 Power Cord Replacement: 手順 4、 3の画像 3

Follow the black and white cord to the trigger.
On the trigger there are two small bolts that you have to loosen.
Loosen them slightly with a H - 1.5 bit.

編集

手順5

Milwaukee 5262-21 Power Cord Replacement: 手順 5、 3の画像 3

Once the bolts are loose you can pull both cords straight out from the trigger.
Pull the cable from the chassis and put it to the side and it has been successfully removed.

編集