修理を始めるには コミュニティ ストア

Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement

はじめに

Use the guide to replace both or one of your broken or wasted thumbsticks in your Xbox Series X controller.

The thumbsticks are the central part of the controller that allows for most of your in-game movement. A wasted or broken thumbstick could reduce your performance for some of your favorite games.

Before using this guide, make sure to ensure that your thumbsticks are the ones wasted or broken because if it is stick drift, then this is not the correct guide for you to follow.

必要な工具と部品

  1. Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement, Thumbstick Covers: 手順 1、 3の画像 1 Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement, Thumbstick Covers: 手順 1、 3の画像 2 Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement, Thumbstick Covers: 手順 1、 3の画像 3

    • Remove the battery pack cover.

    • If there are any batteries inside of it, remove them.

    編集

  2. Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement: 手順 2、 3の画像 1 Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement: 手順 2、 3の画像 2 Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement: 手順 2、 3の画像 3

    • Place an iFixit opening tool between the seam of both the front and side plates.

    • Move the tool repeatedly along the seam between the two plates until the side plate is wholly disconnected from the front plate.

    編集

  4. Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement: 手順 3、 3の画像 1 Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement: 手順 3、 3の画像 2 Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement: 手順 3、 3の画像 3

    • Remove or pick a hole on the warranty sticker label to reveal the center screw.

    • Remove all five screws from the backplate using a TR8 Torx screwdriver.

    編集

  5. Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement: 手順 4、 3の画像 1 Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement: 手順 4、 3の画像 2 Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement: 手順 4、 3の画像 3

    • Remove the front plate from the controller.

    編集

  6. Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement: 手順 5、 3の画像 1 Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement: 手順 5、 3の画像 2 Microsoft Xbox Series X Pulse Controller Thumbstick Cover Replacement: 手順 5、 3の画像 3

    • Pop-out the old thumbsticks and connect the new thumbsticks to the joystick.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

12 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Edgar Galindo

メンバー登録日: 03/20/22

425 ポイント

1ガイドが承認済み

バッジ: 9

+6 個以上のバッジ

チーム

CSU Los Angeles, Team 8-80, Briggs Spring 2022 CSU Los Angeles, Team 8-80, Briggs Spring 2022人のメンバー

CSULA-BRIGGS-S22S8G80

1 メンバー

4のガイドは作成済み

4 件のコメント

Does this method fix joystick drift?

Aaron - 返信

@aaron73239 , to fix the joystick drift, you might want to try this guide.

Kris Rodriguez -

Where is the article addressing stick-drift/replacement, if this is not it?

Pictory - 返信

Perhaps it is this article? Xbox One Wireless Controller Model 1708 Button Replacement
Would be appreciated if someone with relevant knowledge or experience would confirm this.

Pictory -

コメントを追加

統計データ:

過去 24時間: 15

過去 7 日: 88

過去 30 日: 325

今までの合計 22,270