Microsoft Surface Pro 5 Kickstand Replacement

はじめに

The kickstand of your Microsoft Surface Pro 5 is a convenient feature of the device, but if it breaks off or stops holding your tablet upright, you may want to replace it. Follow this guide to replace the kickstand of your Microsoft Surface Pro 5. This is a quick and easy repair that will greatly improve the usability of the Surface Pro 5.

必要な工具と部品

手順1 Kickstand

Microsoft Surface Pro 5 Kickstand Replacement, Kickstand: 手順 1、 3の画像 1

Microsoft Surface Pro 5 Kickstand Replacement, Kickstand: 手順 1、 3の画像 2

Microsoft Surface Pro 5 Kickstand Replacement, Kickstand: 手順 1、 3の画像 3

Lift the kickstand about 90º to reveal the hinges.

編集

手順2

Remove the four 2.7 mm T3 Torx screws, two from each hinge.

編集

手順3

Lower the kickstand to about a 15-30º angle from the device.
Gently pull the kickstand away from the device, rocking left to right to disengage the adhesive tabs connecting the kickstand to the device.
During reassembly, be sure to reinsert the two adhesive tabs into the slots on the back of the device before installing the screws in the hinges.