はじめに
Use this guide to remove or replace the belt guard in a Mi-T-M Air Compressor AM1-PH65-08HD 2012.
This is a prerequisite-only guide. This guide is part of another procedure and is not meant to be used alone.
必要な工具と部品
-
-
Use a 10 mm socket to remove the bolt securing the belt guard.
-
-
-
-
Tilt the belt guard away from the device and lift it out to remove it.
-
もう少しです！
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
