メインコンテンツにスキップ

必要なもの

  1. MiTM Air Compressors AM1PH6508HD 2012 Belt Guard Bracket Replacement, Remove the belt guard bracket bolts: 手順 1、 1の画像 1
    • Use a 7/16 inch socket to remove the nuts and accompanying bolts securing the belt guard bracket to the rear belt guard.

    • You may need to hold the bolts in place with a 7/16 inch wrench during removal.

    • Don't misplace the washers that are removed during this step.

    • During reassembly, you may need to slightly loosen the two head bolts securing the belt guard bracket in order to properly align the bracket with the mounting holes in the rear belt guard.

  2. MiTM Air Compressors AM1PH6508HD 2012 Belt Guard Bracket Replacement: 手順 2、 1の画像 1
    • Use a 1/2 inch socket to remove the two bolts securing the belt guard bracket to the cylinder head.

    • Don't lose the loosened spacers underneath the belt guard bracket.

    • Don't misplace the washers that are removed during this step.

  3. MiTM Air Compressors AM1PH6508HD 2012 Belt Guard Bracket Replacement, Remove the belt guard bracket: 手順 3、 2の画像 1 MiTM Air Compressors AM1PH6508HD 2012 Belt Guard Bracket Replacement, Remove the belt guard bracket: 手順 3、 2の画像 2
    • Lift the belt guard bracket straight up to remove it.

  4. MiTM Air Compressors AM1PH6508HD 2012 Belt Guard Bracket Replacement, Remove the spacers: 手順 4、 2の画像 1 MiTM Air Compressors AM1PH6508HD 2012 Belt Guard Bracket Replacement, Remove the spacers: 手順 4、 2の画像 2
    • Remove the four spacers from the top of the cylinder head.

終わりに

To reassemble your device, follow these instructions in reverse order.

Kyle Smith

メンバー登録日: 2021年02月01日

34,552 ポイント

123のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 17