Meta Quest 3 Controller Strap Replacement

はじめに

Have you ever wanted to add accessory's to your oculus quest but were afraid to break something, or simply not know how? In this guide I will go over how to apply the Meta Quest Active Straps for the oculus quest 3 controllers. I will guide you step-by-step to ensure you do not break anything and know how to properly apply the accessory.

必要な工具と部品

手順1 Controller straps

Meta Quest 3 Controller Strap Replacement, Controller straps: 手順 1、 1の画像 1

First, you will want to pick up any of the controllers to begin replacing the wrist strap.

編集

手順2

Adjacent to the controller's joystick is a white triangle button.
You need to press down firmly on the button to open the controller's battery compartment.

編集

手順3

Once you open the compartment, pinch and pull up the strap to disconnect it from the controller.

編集

手順4

Grab the corresponding wrist strap for the controller you are working on.

編集

手順5

With the new wrist strap, push the black clip down into the now-empty small compartment to connect your new strap to the controller.

編集

手順6

You can close the battery compartment using the new cover connected to the controller strap.
Closing the battery compartment can be frustrating because it is connected to the strap; I found it easier to slide the cover from the bottom to the top.
The new controller straps come with new battery compartment covers, so when you replace the straps, you will end up with spare parts.

編集

手順7

Meta Quest 3 Controller Strap Replacement: 手順 7、 3の画像 3

Put the controller in your hands to see if you need to adjust the fit of the strap.
If Adjustments are needed, you can pull or push the strap through the clip's hole.

編集

手順8

Next, repeat steps 2-7 on the second controller.
As mentioned in step 6, you will have spare parts left over from the original wrist strap and battery cover. Store these parts somewhere safe if you ever feel like reverting to the original controller straps.

編集