メインコンテンツにスキップ

MerchSource the Black Series Boat Racer Gaskets Replacement

必要な工具と部品

  1. MerchSource the Black Series Boat Racer Gaskets Replacement, Gaskets: 手順 1、 2の画像 1 MerchSource the Black Series Boat Racer Gaskets Replacement, Gaskets: 手順 1、 2の画像 2
    • Remove the screw on the top of the boat at the rear end using a Phillips #2 screwdriver.

    • Screw length is 16 mm.

  2. MerchSource the Black Series Boat Racer Gaskets Replacement: 手順 2、 3の画像 1 MerchSource the Black Series Boat Racer Gaskets Replacement: 手順 2、 3の画像 2 MerchSource the Black Series Boat Racer Gaskets Replacement: 手順 2、 3の画像 3
    • Remove the top of the boat by sliding it backwards and then pulling it off.

  3. MerchSource the Black Series Boat Racer Gaskets Replacement: 手順 3、 2の画像 1 MerchSource the Black Series Boat Racer Gaskets Replacement: 手順 3、 2の画像 2
    • Grab the rubber gasket with tweezers and pull it out of the slot.

  4. MerchSource the Black Series Boat Racer Gaskets Replacement: 手順 4、 3の画像 1 MerchSource the Black Series Boat Racer Gaskets Replacement: 手順 4、 3の画像 2 MerchSource the Black Series Boat Racer Gaskets Replacement: 手順 4、 3の画像 3
    • Gently remove the gasket and replace with a new one.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Monica Reece

メンバー登録日: 08/31/18

672 ポイント

5のガイドは作成済み

チーム

Western Carolina University, Team S1-G3, Virtue Fall 2018 Western Carolina University, Team S1-G3, Virtue Fall 2018人のメンバー

WCU-VIRTUE-F18S1G3

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 257