メインコンテンツにスキップ

Megawheels S10 Rear Mudguard Replacement

必要な工具と部品

  1. Megawheels S10 Rear Mudguard Replacement, Rear Mudguard: 手順 1、 1の画像 1
    • Hold down the power button and wait for a beep to ensure that the scooter is turned off.

  2. Megawheels S10 Rear Mudguard Replacement: 手順 2、 1の画像 1
    • Put up the kickstand so that the scooter is upright.

  3. Megawheels S10 Rear Mudguard Replacement: 手順 3、 1の画像 1
    • Unscrew the old mudguard.

  4. Megawheels S10 Rear Mudguard Replacement: 手順 4、 1の画像 1
    • Grip the wheel and pull off the mudguard.

  5. Megawheels S10 Rear Mudguard Replacement: 手順 5、 1の画像 1
    • Remove the connector.

  6. Megawheels S10 Rear Mudguard Replacement: 手順 6、 1の画像 1
    • Attach the new mudguard's power connector.

  7. Megawheels S10 Rear Mudguard Replacement: 手順 7、 1の画像 1
    • Line up the new mudguard with the screw holes and reinsert the screws.

終わりに

If these steps are followed correctly, then your manual break and tail light should function good as new!

作成者

2人の作成者と共同で作成されました。

Andrew DiCapo

メンバー登録日: 09/28/21

145 ポイント

1ガイドが承認済み

チーム

University of North Texas, Team 2-9, Raign Fall 2021 University of North Texas, Team 2-9, Raign Fall 2021人のメンバー

UNT-RAIGN-F21S2G9

2 メンバー

1のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 27

今までの合計 1,102