メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Medion Akoya MD 98560 Heat Sink Replacement

必要な工具と部品

  1. Medion Akoya MD 98560 Heat Sink Replacement, Heat Sink: 手順 1、 1の画像 1
    • Remove the battery by sliding both sliders to the left.

    • Hold the left slider as you slide the battery away from you.

  2. Medion Akoya MD 98560 Heat Sink Replacement: 手順 2、 1の画像 1
    • Press and hold the power button for 10 - 15 seconds, to release any excess power from the laptop.

  3. Medion Akoya MD 98560 Heat Sink Replacement: 手順 3、 1の画像 1
    • After removing the battery, undo the single screw holding the RAM compartment lid.

    • Gently pop out the lid with a few clicks.

  4. Medion Akoya MD 98560 Heat Sink Replacement: 手順 4、 1の画像 1
    • Undo the white and black cable, and the screw.

    • Lift the wifi board up and away from you.

  5. Medion Akoya MD 98560 Heat Sink Replacement: 手順 5、 2の画像 1 Medion Akoya MD 98560 Heat Sink Replacement: 手順 5、 2の画像 2
    • Pry the metal clips holding the RAM units outward which will make the uint pop upwards.

    • Slide the unit out, towards you.

  6. Medion Akoya MD 98560 Heat Sink Replacement: 手順 6、 1の画像 1
    • Undo the single screw holding the hard drive lid.

  7. Medion Akoya MD 98560 Heat Sink Replacement: 手順 7、 1の画像 1
    • Undo the single screw holding the hard drive.

  8. Medion Akoya MD 98560 Heat Sink Replacement: 手順 8、 2の画像 1 Medion Akoya MD 98560 Heat Sink Replacement: 手順 8、 2の画像 2
    • Use the black tab to slide the hard drive backwards.

    • Pry the hard drive up, on the far side and it slides out.

    • Be careful when prying the hard drive out of the case, you might drop it and damage it.

  9. Medion Akoya MD 98560 Heat Sink Replacement: 手順 9、 2の画像 1 Medion Akoya MD 98560 Heat Sink Replacement: 手順 9、 2の画像 2
    • Push the 4 black tabs located at the top of the keyboard, under the case.

  10. Medion Akoya MD 98560 Heat Sink Replacement: 手順 10、 2の画像 1 Medion Akoya MD 98560 Heat Sink Replacement: 手順 10、 2の画像 2
    • Be careful when removing the keyboard from the case, it is still attached at the bottom.

    • Pry the black tab backwards, to remove the cable.

  11. Medion Akoya MD 98560 Heat Sink Replacement: 手順 11、 2の画像 1 Medion Akoya MD 98560 Heat Sink Replacement: 手順 11、 2の画像 2
    • On the bottom of the case there are 2 sliders, use these to release the optical drive.

  12. Medion Akoya MD 98560 Heat Sink Replacement: 手順 12、 1の画像 1
    • Undo the 11 screws holding the bottom of the case.

  13. Medion Akoya MD 98560 Heat Sink Replacement: 手順 13、 2の画像 1 Medion Akoya MD 98560 Heat Sink Replacement: 手順 13、 2の画像 2
    • Remove the 2 cables, revealed by removing the keyboard. The cables mentioning "MB" can only be removed after opening the case.

  14. Medion Akoya MD 98560 Heat Sink Replacement: 手順 14、 1の画像 1
    • Pry open the case using something soft, preferably your hands or a spudger.

  15. Medion Akoya MD 98560 Heat Sink Replacement: 手順 15、 1の画像 1
    • When the case is completely lose it will still be attached by the "MB" cables. Remove those before completely removing the case.

  16. Medion Akoya MD 98560 Heat Sink Replacement: 手順 16、 1の画像 1
    • Undo the single screw holding the motherboard.

    • Undo the 4 cables highlighted in blue.

  17. Medion Akoya MD 98560 Heat Sink Replacement: 手順 17、 1の画像 1
    • Also remove the black and white wifi cable from under the motherboard.

  18. Medion Akoya MD 98560 Heat Sink Replacement: 手順 18、 1の画像 1
    • Lift the motherboard out of its socket. The bottom left may get stuck a bit. Don't force the USB sockets.

  19. Medion Akoya MD 98560 Heat Sink Replacement: 手順 19、 2の画像 1 Medion Akoya MD 98560 Heat Sink Replacement: 手順 19、 2の画像 2
    • On the flipside of the motherboard is the CPU covered by the heatsink.

    • Before removing the heatsink, remove the fan cable looping over the heatsink.

    • Remove the 6 screws, holding the heatsink.

  20. Medion Akoya MD 98560 Heat Sink Replacement: 手順 20、 1の画像 1
    • First you will need a card to scrape off the old paste. Keep a coffee filter ready to clean the card.

    • Both the heatsink and CPU's must be totally cleaned of any remaining grease.

    • The triangular part on the heatsink leads to the graphics card.

  21. Medion Akoya MD 98560 Heat Sink Replacement: 手順 21、 1の画像 1
    • Be very thorough, any remaining grease may render your new layer of paste useless.

    • The top cores are the CPU, still not cleaned.

    • The bottom core is the newly cleaned video card CPU.

  22. Medion Akoya MD 98560 Heat Sink Replacement: 手順 22、 2の画像 1 Medion Akoya MD 98560 Heat Sink Replacement: 手順 22、 2の画像 2
    • Use alcohol or a oil-free degreaser and coffee filters or a lint-free cloth.

    • Apply the paste on the CPU's very carefully, you don't want certain thermal pastes on electrical circuits.

    • Your paste needs to be distributed evenly on the whole metal cap of the CPU.

    • Reverse engineer this guide to put the laptop back together.

    • Let the paste settle in by letting the computer run for a few consecutive hours.

    • Run a temperature monitor software to check if your application has been effective or not. After a day or two, you may want to stress-test it by running some high end application all together and monitor the temperature.

終わりに

To reassemble your device, follow these instructions in reverse order.

9 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Ikfixda

メンバー登録日: 07/03/11

465 ポイント

1ガイドが承認済み

3 件のコメント

Diese Anleitung zum Öffnen und Ausbauen des Kühlers ist ebenfalls anwendbar für das Medion Akoya P6624 (MD98390)

Lutz - 返信

works for some other Aldi Akoya models too! quite versatile.

ein Stein - 返信

this disassembly is required to access the knob cell . remove knob cell and do a BIOS full reset for a proper RESET. still UEFI variables in NVRAM may have gone haywire, thus killing the laptop machine.

ein Stein - 返信

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 15

過去 30 日: 44

今までの合計 14,227