修理を始めるには コミュニティ ストア

Marshall Emberton Button Replacement

はじめに

The main button on top of the Marshall Emberton speaker is used to navigate between tracks and also the volume. This guide provides detailed instructions on how to replace the main button on the Emberton Bluetooth speaker.

With constant pressure on the button, it may eventually wear out and stop working. Replacing the button is very simple and only requires a TR-9 screwdriver.

必要な工具と部品

  1. Marshall Emberton Button Replacement, Button: 手順 1、 1の画像 1

    • Remove the rubber casing from the speaker by peeling it off using your nails.

    編集

  2. Marshall Emberton Button Replacement: 手順 2、 1の画像 1

    • Use a TR9 screwdriver to remove the eight 1 cm screws located on top of the speaker.

    編集

  4. Marshall Emberton Button Replacement: 手順 3、 1の画像 1

    • Once all the screws are off, you must pry the plastic piece off using any tool capable of sliding into the crevice. Then easily pop the piece out.

    編集

  5. Marshall Emberton Button Replacement: 手順 4、 1の画像 1

    • On the back side of the plastic piece, there is a circuit which is shown in the picture. Use a TR9 screwdriver to remove two 1.2 cm screws to detach the circuit from the plastic housing.

    編集

  6. Marshall Emberton Button Replacement: 手順 5、 1の画像 1

    • Once the circuit is removed, you may gently pop the button off and easily replace it with a new one.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Asia Baldwin

メンバー登録日: 09/26/22

697 ポイント

5のガイドは作成済み

バッジ: 7

+4 個以上のバッジ

チーム

CSU Los Angeles, Team 5-1, Adachi Fall 2022 CSU Los Angeles, Team 5-1, Adachi Fall 2022人のメンバー

CSULA-ADACHI-F22S5G1

5 メンバー

5のガイドは作成済み

3 件のコメント

where can i find a replacement button

MANU 1907 - 返信

The worst instruction I've ever seen in my life. If you do this, you will break your device.

cool eo - 返信

yes, i confirme !!!

Mallet Jp -

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 13

過去 30 日: 77

今までの合計 1,112