メインコンテンツにスキップ

Maisto Rock Crawler Remote Circuit Board Replacement

必要な工具と部品

  1. Maisto Rock Crawler Remote Circuit Board Replacement, Remote Circuit Board: 手順 1、 1の画像 1
    • Remove the batteries before doing anything.

    • Use the driver and bit J1 to remove the five 9.5mm Philips screws holding the remote together.

  2. Maisto Rock Crawler Remote Circuit Board Replacement: 手順 2、 1の画像 1
    • Take off the half of the remote that had the screw heads facing up.

  3. Maisto Rock Crawler Remote Circuit Board Replacement: 手順 3、 1の画像 1
    • Slide out the circuit board.

    • Use the soldering iron to desolder the 3 wires.

終わりに

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

kevin

メンバー登録日: 02/10/16

874 ポイント

6のガイドは作成済み

チーム

USF Tampa, Team 1-2, Sullivan Spring 2016 USF Tampa, Team 1-2, Sullivan Spring 2016人のメンバー

USFT-SULLIVAN-S16S1G2

3 メンバー

6のガイドは作成済み

5 件のコメント

Can you show the wheel controller mechanism. I can see 3 contacts on mine but I think mine is missing something that would bring the contacts together as you turn the wheel to steer left and right. Thanks.

Ferdinand Fong - 返信

the triger is broken to drive the truck

joey heller - 返信

Somebody have the remote control for

Theodore Brock - 返信

I have a 1970 R/T charger RC car, 2.4GHz, I changed it up fully, but the pairing light wont come on. But I can show the lights,the control power is good.what is wrong can anybody help me find the problem and fix it.

Keith Pryor - 返信

How to pair new controller ?

Karel Říha - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 8

過去 30 日: 16

今までの合計 4,558