メインコンテンツにスキップ

はじめに

You can change the motherboard of the device by following this guide. When disconnecting the mother board , try to unplug all the wires carefully. Using more force can damaged the wires clips or wires it self.

パーツ

パーツは指定されていません。

  1. Flip your device with back panel facing up.
    • Flip your device with back panel facing up.

  2. Unscrew four  Phillips #0 screws from the back panel. Unscrew four  Phillips #0 screws from the back panel. Unscrew four  Phillips #0 screws from the back panel.
    • Unscrew four Phillips #0 screws from the back panel.

  3. Unscrew two Phillips #0 screws from the back panel. Unscrew two Phillips #0 screws from the back panel.
    • Unscrew two Phillips #0 screws from the back panel.

  4. Use a plastic opening tool to pop the right side of the panel. Use a plastic opening tool to pop the right side of the panel.
    • Use a plastic opening tool to pop the right side of the panel.

  5. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  6. Lifting the back panel too quickly or forcefully may damage the speaker cable and battery cable, which are still attached underneath.
    • Lifting the back panel too quickly or forcefully may damage the speaker cable and battery cable, which are still attached underneath.

    • Gently lift up the back panel.

  7. Remove the tape. Unplug the cable for the speaker. Unplug the cable for the speaker.
    • Remove the tape.

    • Unplug the cable for the speaker.

  8. Remove the cable of the battery. Tape removal is not necessary. Tape removal is not necessary.
    • Remove the cable of the battery.

    • Tape removal is not necessary.

  9. Place the back panel gently on the table.
    • Place the back panel gently on the table.

  10. Unscrew four screws in the top left corner  by using  Phillips #0 size screwdriver. Unscrew four screws in the top left corner  by using  Phillips #0 size screwdriver.
    • Unscrew four screws in the top left corner by using Phillips #0 size screwdriver.

  11. Remove all the electrical tapes from different places as indicated. Remove all the electrical tapes from different places as indicated.
    • Remove all the electrical tapes from different places as indicated.

  12. Remove the white clip attached with black and white wires. Carefully remove the clip  by  pulling it to the opposite side from the clip.
    • Remove the white clip attached with black and white wires.

    • Carefully remove the clip by pulling it to the opposite side from the clip.

  13. Unplug the wires by pushing it down and slowly  pulling it towards you. After unplugging the wires, take the motherboard out. After unplugging the wires, take the motherboard out.
    • Unplug the wires by pushing it down and slowly pulling it towards you.

    • After unplugging the wires, take the motherboard out.

まとめ

To reassemble your device, follow these instructions in reverse order.

Umar siddique

メンバー登録日: 2016年10月25日

201 ポイント

2のガイドは作成済み

チーム

UMass Dartmouth, Team 1-5, Catania Fall 2016 UMass Dartmouth, Team 1-5, Catania Fall 2016人のメンバー

UMASSD-CATANIA-F16S1G5

3 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 161