はじめに

Outline what you are going to teach someone how to do.

パーツ

パーツは必要ありません。

The battery compartment is located in the front-right side of the laptop.
  • The battery compartment is located in the front-right side of the laptop.

コメントを追加する

To insert the battery, gently slide it into the compartment until it clicks in place.
  • To insert the battery, gently slide it into the compartment until it clicks in place.

  • To remove, slide the button highlighted in the red rectangle to the right to release the battery and slide it from the compartment.

コメントを追加する

With the laptop upside down and with the battery removed, use a Torx #9 screw driver to remove the three .84 in. screws shown.
  • With the laptop upside down and with the battery removed, use a Torx #9 screw driver to remove the three .84 in. screws shown.

コメントを追加する

Carefully pull up on the front of the keyboard to pop it out from the case. Then slide the back out so the keyboard becomes nearly free.
  • Carefully pull up on the front of the keyboard to pop it out from the case.

  • Then slide the back out so the keyboard becomes nearly free.

コメントを追加する

Disconnect the ribbon that is connecting the keyboard to the rest of the computer. Pull the keyboard out and repair or replace as needed. Pull the keyboard out and repair or replace as needed.
  • Disconnect the ribbon that is connecting the keyboard to the rest of the computer.

  • Pull the keyboard out and repair or replace as needed.

コメントを追加する

Remove the front plastic panel of the laptop by carefully lifting it up. Remove the front plastic panel of the laptop by carefully lifting it up. Remove the front plastic panel of the laptop by carefully lifting it up.
  • Remove the front plastic panel of the laptop by carefully lifting it up.

コメントを追加する

With a Torx #9 screwdriver, remove the three .30 in. screws that hold the metal frame in place.
  • With a Torx #9 screwdriver, remove the three .30 in. screws that hold the metal frame in place.

コメントを追加する

Remove the metal chasis that holds the hard drive. Remove the metal chasis that holds the hard drive. Remove the metal chasis that holds the hard drive.
  • Remove the metal chasis that holds the hard drive.

コメントを追加する

In order to remove the hard drive, remove the four .22 in. screws circled in red found on both sides of the metal chassis with a Torx #9 screwdriver.
  • In order to remove the hard drive, remove the four .22 in. screws circled in red found on both sides of the metal chassis with a Torx #9 screwdriver.

コメントを追加する

Pull the hard drive out. Pull the hard drive out.
  • Pull the hard drive out.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Ronan

メンバー登録日: 2011年10月10日

42 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 6-1, Regan Fall 2011 Cal Poly, Team 6-1, Regan Fall 2011人のメンバー

CPSU-REGAN-F11S6G1

4 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 9

今までの合計 1,046