はじめに

Use this guide to replace the display.

Orientate the computer right side up and open the display case to reveal the display.
  • Orientate the computer right side up and open the display case to reveal the display.

  • Use a plastic opening tool to remove the two small plastic plugs located on the display case just below the display.

コメントを追加する

Use a T8 torx screwdriver to remove the two, 7.7mm long screws that were revealed by removing the plastic plugs.
  • Use a T8 torx screwdriver to remove the two, 7.7mm long screws that were revealed by removing the plastic plugs.

  • Twist counterclockwise to remove the screw.

  • Caution: Once the screws are removed, the display is only held by two screws. Handle delicately.

コメントを追加する

Grip the two bottom corners of the plastic display cover and gently pull towards yourself so that the display cover rotates about the top of the display case.
  • Grip the two bottom corners of the plastic display cover and gently pull towards yourself so that the display cover rotates about the top of the display case.

  • The display cover should release from top.

  • Remove the display case.

コメントを追加する

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Locate the black connector on the right of the display. The connector can be identified by the pink, light blue, and white wires protruding from its side.
  • Locate the black connector on the right of the display. The connector can be identified by the pink, light blue, and white wires protruding from its side.

  • Remove the black connector from the circuit board by pulling it away from its adapter.

コメントを追加する

Using a T8 torx screwdriver, remove the four, 10.8mm long screws from the corners of the display.
  • Using a T8 torx screwdriver, remove the four, 10.8mm long screws from the corners of the display.

  • Caution: The display is no longer supported and must be handled with care.

コメントを追加する

Carefully tilt the display downwards and rest it on the keyboard.
  • Carefully tilt the display downwards and rest it on the keyboard.

コメントを追加する

Locate the orange ribbon cable on the back of the display. Open the white tab fastener by pulling it outward. Remove the orange ribbon cable by gently pulling it away from the opened tab fastener.
  • Locate the orange ribbon cable on the back of the display.

  • Open the white tab fastener by pulling it outward.

  • Remove the orange ribbon cable by gently pulling it away from the opened tab fastener.

  • The display is now free.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Jason

メンバー登録日: 2011年10月12日

64 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 6-3, Regan Fall 2011 Cal Poly, Team 6-3, Regan Fall 2011人のメンバー

CPSU-REGAN-F11S6G3

4 メンバー

12のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 7

今までの合計 1,123