メインコンテンツにスキップ

MacBook Unibody Model A1342 Rear Speaker Assembly Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement, Rear Speaker Assembly: 手順 1、 1の画像 1
    • Use the flat end of a spudger to pry the AirPort/Bluetooth cable connector up off the logic board.

  2. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 手順 2、 1の画像 1
    • Remove the following screws securing the right speaker assembly to the upper case:

    • One 12 mm Phillips screw.

    • One 3 mm Phillips screw.

  3. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 手順 3、 1の画像 1
    • Remove the single 2.2 mm Phillips screw inserted horizontally into the side of the optical drive.

  4. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 手順 4、 2の画像 1 MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 手順 4、 2の画像 2
    • Pry the AirPort and Bluetooth antenna connectors (3 total) up off the AirPort/Bluetooth card.

    • De-route the long antenna from its channel in the rear speaker housing.

  5. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 手順 5、 1の画像 1
    • Use the flat end of a spudger to pry the rear speaker cable connector up off the logic board.

  6. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 手順 6、 1の画像 1
    • Remove the rear speaker assembly from the upper case.

  7. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 手順 7、 2の画像 1 MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 手順 7、 2の画像 2
    • Carefully peel the AirPort/Bluetooth cable from its channel within the rear speaker assembly.

    • Use the flat end of a spudger to pry the AirPort/Bluetooth cable up off the rear speaker.

  8. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 手順 8、 1の画像 1
    • Remove three 3 mm Phillips screws securing the AirPort/Bluetooth board to the rear speaker assembly.

  9. MacBook Unibody Model A1342 Rear Speaker Assembly Replacement: 手順 9、 1の画像 1
    • Lift the AirPort/Bluetooth board up off the rear speaker assembly.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Walter Galan

693,936 ポイント

1,203のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 695