メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Remove the two 7.9 mm Phillips screws securing the left speaker assembly to the logic board.
    • Remove the two 7.9 mm Phillips screws securing the left speaker assembly to the logic board.

  2. Slightly lift the left speaker assembly off the logic board. Use the flat end of a spudger to lift the microphone and left speaker connectors out of their sockets on the logic board.
    • Slightly lift the left speaker assembly off the logic board.

    • Use the flat end of a spudger to lift the microphone and left speaker connectors out of their sockets on the logic board.

    • Pry up from beneath the wires.

    • Remove the left speaker assembly from the logic board.

終わりに

To reassemble your device, follow these instructions in reverse order.

Andrew Bookholt

565,251 ポイント

618のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,311