MacBook Pro 15" Unibody Mid 2012 Lower Case Replacement

はじめに

Remove the lower case to access most of your MacBook Pro's internals.

Remove the following ten screws securing the lower case to the upper case:
Three 13.5 mm (14.1 mm) Phillips screws.
Seven 3 mm Phillips screws.
When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.
Remove the lower case and set it aside.

終わりに

To reassemble your device, follow these instructions in reverse order.

21 の人々がこのガイドを完成させました。

4人の作成者と共同で作成されました。

メンバー登録日: 10/17/09

502,749 ポイント

407のガイドは作成済み

Staff

135 メンバー

16,732のガイドは作成済み