メインコンテンツにスキップ

MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement, Optical Drive: 手順 1、 1の画像 1
    • Disconnect the camera cable by pulling the male end straight away from its socket.

  2. MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement: 手順 2、 1の画像 1
    • Deroute the camera data cable from the channel in the optical drive.

  3. MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement: 手順 3、 1の画像 1
    • Use a spudger to pry the optical drive connector straight up off the logic board.

  4. MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement: 手順 4、 2の画像 1 MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement: 手順 4、 2の画像 2
    • Remove two 8 mm Phillips screws securing the camera cable bracket to the upper case.

    • The rightmost screw may remain captive in the camera cable.

    • Lift the camera cable bracket out from the upper case.

  5. MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement: 手順 5、 1の画像 1
    • Remove the following three Phillips screws securing the optical drive to the upper case:

    • One 3.5 mm Phillips screw.

    • Two 2.5 mm Phillips screws.

  6. MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement: 手順 6、 1の画像 1
    • Lift the optical drive from its left edge and pull it out of the computer.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Walter Galan

694,561 ポイント

1,203のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 1,241