メインコンテンツにスキップ

MacBook Pro 15" Unibody 2.53 GHz Mid 2009 Lower Case Replacement

必要な工具と部品

  1. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 Lower Case Replacement, Lower Case: 手順 1、 1の画像 1
    • Remove the following ten screws securing the lower case to the upper case:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

  2. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 Lower Case Replacement: 手順 2、 1の画像 1
    • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

    • Remove the lower case and set it aside.

終わりに

To reassemble your device, follow these instructions in reverse order.

26 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Walter Galan

694,638 ポイント

1,203のガイドは作成済み

コメント 1 件

These two little plastic clamps on the upper case that snap on/off the lower case broke. I was looking through the store for replacements but I couldn't find any. Does anyone know where I can get these?

hmalissa - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 11

過去 30 日: 15

今までの合計 15,691