メインコンテンツにスキップ

MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement

必要な工具と部品

  1. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement, Lower Case: 手順 1、 1の画像 1
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.1 mm

    • Two 2.3 mm

  2. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 2、 2の画像 1 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 2、 2の画像 2
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

  3. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 3、 3の画像 1 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 3、 3の画像 2 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 3、 3の画像 3
    • The lower case has two plastic pegs (red) that fit into plastic clips in the upper case (orange).

    • During reassembly, gently push down the center of the lower case to reattach the case to its two plastic clips.

  4. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement, Battery Connector: 手順 4、 1の画像 1
    • Peel back the sticker covering the battery connector.

  5. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 5、 3の画像 1 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 5、 3の画像 2 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 5、 3の画像 3
    • Gently lift each side of the battery connector to pry the connector out of its socket on the logic board.

    • Bend the connector back toward the battery, ensuring that the battery connector doesn't accidentally make contact with the logic board.

  6. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement, I/O Board Cable (Top): 手順 6、 1の画像 1
    • Remove the four 2.2 mm T5 Torx screws securing the I/O board cable connector covers.

  7. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 7、 2の画像 1 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 7、 2の画像 2
    • Remove the left connector cover.

    • Use the flat end of a spudger to pry the left end of the I/O board cable up from its socket on the logic board.

  8. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 8、 2の画像 1 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 8、 2の画像 2
    • Remove the right connector cover.

    • Use the flat end of a spudger to pry the right end of the I/O board cable up from its socket on the logic board.

  9. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: 手順 9、 1の画像 1
    • Peel the top I/O board cable up from the adhesive securing it to the fan.

    • Remove the cable.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Andrew Optimus Goldheart

メンバー登録日: 10/17/09

502,275 ポイント

407のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Staff

136 メンバー

16,573のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 27

過去 30 日: 88

今までの合計 8,860