はじめに
Use this guide to replace the AirPort board.
必要な工具と部品
-
-
Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
-
Eight 3.0 mm
-
Two 2.3 mm
-
-
-
-
Use the tip of a spudger to detach the three antenna connectors up from their sockets on the AirPort board.
-
もう少しです!
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
5 の人々がこのガイドを完成させました。