必要な工具と部品
-
-
Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board. On reassembly, connect this end first as it does not flex.
-
In a similar fashion, remove the I/O Board connector from its socket on the I/O Board.
-
Remove the I/O Board cable from the MacBook Pro.
-
-
もう少しです!
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
ある他の人がこのガイドを完成しました。