メインコンテンツにスキップ

MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement

必要な工具と部品

  1. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement, Lower Case: 手順 1、 1の画像 1
    • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

    • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

  2. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: 手順 2、 2の画像 1 MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: 手順 2、 2の画像 2
    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

終わりに

To reassemble your device, follow these instructions in reverse order.

85 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Andrew Optimus Goldheart

メンバー登録日: 10/17/09

502,275 ポイント

407のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Staff

136 メンバー

16,573のガイドは作成済み

7 件のコメント

When purchasing a new bottom panel, do any of the stickers or pads have to be transferred to the new part? How?

Matthew Parrott - 返信

This is the instructions on how to just remove the bottom cover to access other components. The part is sold here on iFixit for $99 and looks to include the rubber feet.

Cwoodyard -

Where can I get a new backover?

SkyGamer - 返信

The back cover is sold here and can be found at the top of the page.

Cwoodyard -

Can i buy this bottom replacement piece here or is this instructions on how to do it?

itsRadioBiz - 返信

コメントを追加

統計データ:

過去 24時間: 6

過去 7 日: 37

過去 30 日: 184

今までの合計 64,784