メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Prereq to disconnect the battery

パーツ

パーツは指定されていません。

  1. If necessary, remove the plastic cover adhered to the battery contact board.
    • If necessary, remove the plastic cover adhered to the battery contact board.

  2. Use the flat end of a spudger to lift the battery connector straight up out of its socket on the logic board. Be sure you lift up only on the connector itself, not the socket, or you risk permanent damage to the logic board.
    • Use the flat end of a spudger to lift the battery connector straight up out of its socket on the logic board.

    • Be sure you lift up only on the connector itself, not the socket, or you risk permanent damage to the logic board.

  3. Bend the battery connector up out of the way to prevent accidental contact with its socket during your repair.
    • Bend the battery connector up out of the way to prevent accidental contact with its socket during your repair.

終わりに

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

メンバー登録日: 2012年10月18日

436,435 ポイント

547のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

133 メンバー

15,614のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 714