メインコンテンツにスキップ

MacBook Pro 13" Retina Display Late 2012 SSD Assembly Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。
  1. MacBook Pro 13" Retina Display Late 2012 SSD Assembly Replacement, SSD Assembly: 手順 1、 3の画像 1 MacBook Pro 13" Retina Display Late 2012 SSD Assembly Replacement, SSD Assembly: 手順 1、 3の画像 2 MacBook Pro 13" Retina Display Late 2012 SSD Assembly Replacement, SSD Assembly: 手順 1、 3の画像 3
    • Use your thumb or finger to bend the plastic spring bar on the SSD tray, freeing the two clips at the front side of the device.

    • While holding the spring bar depressed, tilt the SSD assembly up out of its cavity.

  2. MacBook Pro 13" Retina Display Late 2012 SSD Assembly Replacement: 手順 2、 1の画像 1
    • Remove the SSD assembly from the upper case.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Walter Galan

693,936 ポイント

1,203のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 607