メインコンテンツにスキップ

MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement, Battery Connector: 手順 1、 1の画像 1
    • Remove the plastic cover adhered to the battery contact board.

  2. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: 手順 2、 1の画像 1
    • Remove the following screws securing the battery connector board to the logic board:

    • Two 2.8 mm T6 Torx screws

    • One 7.0 mm T6 Torx shouldered screw

  3. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: 手順 3、 2の画像 1 MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: 手順 3、 2の画像 2
    • Use tweezers to remove the small plastic cover located near the bottom right of the battery connector board.

  4. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: 手順 4、 1の画像 1
    • Remove the wide head 6.4 mm T6 Torx screw securing the battery connector to the logic board assembly.

  5. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: 手順 5、 2の画像 1 MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: 手順 5、 2の画像 2
    • Carefully lift the battery connector board up off the logic board.

    • It is recommended to bend the battery cables just slightly, to keep the board suspended up above the logic board and out of the way.

    • Do not fold the board completely over, or crease the cables, as this may damage the battery.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Walter Galan

693,920 ポイント

1,203のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 251