はじめに

Restore sound to your laptop by replacing the speaker.

Unplug your MacBook Air and power it off before you proceed.
  • Unplug your MacBook Air and power it off before you proceed.

  • Remove ten Phillips screws securing the lower case to the MacBook Air:

    • Six 2.8 mm screws

    • Two 3.8 mm screws

    • Two 5.4 mm screws

コメントを追加する

Slightly lift the lower case near the vents and push it toward the rear of the computer to free the mounting tabs. Slightly lift the lower case near the vents and push it toward the rear of the computer to free the mounting tabs.
  • Slightly lift the lower case near the vents and push it toward the rear of the computer to free the mounting tabs.

コメントを追加する

Disconnect the battery connector by pulling it straight out of its socket.
  • Disconnect the battery connector by pulling it straight out of its socket.

コメントを追加する

Remove the following nine screws securing the battery to the Air:
  • Remove the following nine screws securing the battery to the Air:

    • Four 2.9 mm Phillips.

    • Four 3.8 mm Phillips.

    • One 7.2 mm Phillips.

コメントを追加する

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Lift the battery out of the Air.
  • Lift the battery out of the Air.

コメントを追加する

Remove the following two screws securing the speaker assembly to the upper case.
  • Remove the following two screws securing the speaker assembly to the upper case.

    • One 3 mm Phillips.

    • One 5.8 mm Phillips.

コメントを追加する

Use a spudger to lift the audio-out connector board off the adhesive that secures it to the hard drive bracket. Disconnect the audio out connector from its socket.
  • Use a spudger to lift the audio-out connector board off the adhesive that secures it to the hard drive bracket.

  • Disconnect the audio out connector from its socket.

コメントを追加する

Rotate the speaker assembly toward the center of the Air. Use a spudger to pry the speaker cable connector up off the audio board.
  • Rotate the speaker assembly toward the center of the Air.

  • Use a spudger to pry the speaker cable connector up off the audio board.

コメントを追加する

Use the tip of a spudger to pry the speaker connector up off the audio board.
  • Use the tip of a spudger to pry the speaker connector up off the audio board.

コメントを追加する

Use the tip of a spudger to separate the audio board from the adhesive securing it to the logic board.
  • Use the tip of a spudger to separate the audio board from the adhesive securing it to the logic board.

コメントを追加する

Disconnect the audio-out cable by pulling the male end straight away from its socket on the audio board.
  • Disconnect the audio-out cable by pulling the male end straight away from its socket on the audio board.

コメントを追加する

Speaker assembly remains.
  • Speaker assembly remains.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

Walter Galan

548,392 ポイント

2,822のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 21

過去 30 日: 68

今までの合計 18,735